Various Mk3, Mk4 & mk5 parts

[Dave190]

Alright mate,got a steering column for a mk5?if so would you post?.

Thanks.Dave.

[trippydog]

Alright mate,got a steering column for a mk5?if so would you post?.

Thanks.Dave.

I've got a mk4 one, 92... part no. Not sure if it changed on the mk5's.

[Dave190]

Ok,im not sure either,will try and find out and get back to you,if it does fit will def want it!!Cheers.Dave.

[trippydog]

Ok,im not sure either,will try and find out and get back to you,if it does fit will def want it!!Cheers.Dave.

Ok, no prob. Full part no: 92VB-3C529-A2A

[turnippits]

have you got a spare wheel hanger for a mark 5 15 inch wheels

[trippydog]

have you got a spare wheel hanger for a mark 5 15 inch wheels

I think I might have.... did have one spare wheel hanger but not sure what size wheels it was for. Will have a look for you.

Thanks,

Si

[trippydog]

have you got a spare wheel hanger for a mark 5 15 inch wheels

The one I have is a mk5 one but think it might be for 14" wheels:

[turnippits]

that is a 14 inch one mate i would have thought it would have been easy to get one but every one i have looked at is the same as mine siezed up

[trippydog]

that is a 14 inch one mate i would have thought it would have been easy to get one but every one i have looked at is the same as mine siezed up

Have you tried sites like breakeryard.com?

[turnippits]

found one thanks for your help everyone on ebay from transitparts.com 39.99+7.99 postage

[turnippits]

do you have a pull out door step to fit the slide door on a smiley please as i carry two disabled relatives in my mini-bus turnippits

[trippydog]

do you have a pull out door step to fit the slide door on a smiley please as i carry two disabled relatives in my mini-bus turnippits

No, sorry...

[spooks]

HI DUDE I SEE YOUR BUSY THATS ALWAYS GOOD , I DONT SUPPOSE YOU HAVE A 2,5D 1996 CLUTCH PLATE I AM HAVING TRUBBEL TRACKING ON DOWN I KNOW IT SEAMS SILLY BUT A STANDARD 242MM AND THE HEAVY DUTIE 267MM CLUTCH DONT FIT THE ORIGINAL IS PROPPER MULLERD NOW, BUT IT HAS 6 SPRINGS IF THAT HELPS I TRYED TO FIT A 242MM CLUTCH PLATE AND PRESSURE PLATE BUT IT SITS WRONG IE IF I PUT IT IN ILL HAVE TO USE BIGGER BOLTS AND CRAM IT IN ? THIS SEEMS VERY ODD I CANT FIND THE FORD PART NO THERS NO GENERIC PART THAT MATCHES ? IM THINKING ITS MABY A ONE OFF CUSTOM AS THE GEARING IS QUITE HIGH IF YOU HAVE ANY INFO PLEASE COULD U FORWARD MANY, THANKS SPOOKS

[trippydog]

HI DUDE I SEE YOUR BUSY THATS ALWAYS GOOD , I DONT SUPPOSE YOU HAVE A 2,5D 1996 CLUTCH PLATE I AM HAVING TRUBBEL TRACKING ON DOWN I KNOW IT SEAMS SILLY BUT A STANDARD 242MM AND THE HEAVY DUTIE 267MM CLUTCH DONT FIT THE ORIGINAL IS PROPPER MULLERD NOW, BUT IT HAS 6 SPRINGS IF THAT HELPS I TRYED TO FIT A 242MM CLUTCH PLATE AND PRESSURE PLATE BUT IT SITS WRONG IE IF I PUT IT IN ILL HAVE TO USE BIGGER BOLTS AND CRAM IT IN ? THIS SEEMS VERY ODD I CANT FIND THE FORD PART NO THERS NO GENERIC PART THAT MATCHES ? IM THINKING ITS MABY A ONE OFF CUSTOM AS THE GEARING IS QUITE HIGH IF YOU HAVE ANY INFO PLEASE COULD U FORWARD MANY, THANKS SPOOKS

Can't help you there, sorry.