Moderator: Luke
Davidreidy wrote:i can get 2 x wings in white
stephenferguson wrote:i took 15mm of the outside, cant remember the inside measurement but there straight, i measured off another mk7 off holes in the sides of the leg, then the lips that i cut off i welded back on the sides. i bought the proper support that slides inside the leg for the tow eye on the passenger side.
I bought the plates that sandwich between the leg and the cross beam, i welded those top and bottom, then bolted the crossbeam through the sides of the plate and the lips that i welded back on, just copied the original mk 7 as much as i could.
i have a part to fit under the bonnet tomorrow which tunnels the air through into the cab and then i'm gonna take the finished pic and add it to the album.
stephenferguson wrote:Here are the pics to how i have done it, any info needed just ask.
http://s873.photobucket.com/albums/ab29 ... onversion/
I just put the bumper on today and mounted the under bonnet parts correctly, so i'll get a pics added tomorrow.
Return to Customising and one offs
Users browsing this forum: No registered users
This site contains affiliate links for which we may be compensated.