What did you do to your connect today?

[dieselboy1978]

so got the van graphics on yesterday! i now have the handle covers on witch are also gloss black rapped and i plan to match in the rear bumper tread plate painting that tomorrow!!!

That van looks sweet.
Am loving the black bonnet. Looks really good.

[Dub-77]

Lowered my LWB/ HI TOP yesterday and as it was arse low I made some hangers today and lifted slightly over level on the rear. Done the axle flip on the rear with new plates welded and Focus MK1 RS springs on the front. My roll bar (rear) is disconnected at the moment. Had a little drive out tonight and all seems good, wheel appears to be central in the rear arch as well so all good. Just need to sort out bodywork now, some sorta graphics to go over it. I'm liking the ones above swtech's and a stainless exh system.

[dieselboy1978]

Lowered my LWB/ HI TOP yesterday and as it was arse low I made some hangers today and lifted slightly over level on the rear. Done the axle flip on the rear with new plates welded and Focus MK1 RS springs on the front. My roll bar (rear) is disconnected at the moment. Had a little drive out tonight and all seems good, wheel appears to be central in the rear arch as well so all good. Just need to sort out bodywork now, some sorta graphics to go over it. I'm liking the ones above swtech's and a stainless exh system.

Pics please. We all love pics.

[Dub-77]

Lowered my LWB/ HI TOP yesterday and as it was arse low I made some hangers today and lifted slightly over level on the rear. Done the axle flip on the rear with new plates welded and Focus MK1 RS springs on the front. My roll bar (rear) is disconnected at the moment. Had a little drive out tonight and all seems good, wheel appears to be central in the rear arch as well so all good. Just need to sort out bodywork now, some sorta graphics to go over it. I'm liking the ones above swtech's and a stainless exh system.

Pics please. We all love pics.

Patience my boy... Patience

[Kent Discos]

finally got around to re-sealing and fitting the blacked headlights....











also re-spraying the f**ked up bumper corner.... all in-time for fordfair on Sunday

[Drizz]

Mine are sat here waiting to be split. General consensus seems to be, in the oven for 20mins at about 100 deg
Anyone concur?

[Mylee]

No oven here. Just a couple of fresh scaple blades

[westers]

i was gona try and do mine with a heatgun (or hairdryer if i cant find our's ) and blade...

satin black, gloss black, matt black? which colour is best? lol

[Kent Discos]

Matt or satin is best...gloss still has the potential to reflect light meaning dazzling headlights... Not good with hids!

[Dub-77]

i was gona try and do mine with a heatgun (or hairdryer if i cant find our's ) and blade...

satin black, gloss black, matt black? which colour is best? lol

Matt black, a heat gun and a flat blade screw driver

[Drizz]

Nice to see a few vans today. Took so many photos, but heres my Transit ones:

[Kent Discos]

thanks for not getting my wheel arch in!


i've got hundreds to go through, but haven't got the time tonight.. so here's one for us connect boys...

[g-man]

nice pics drizz

[Drizz]

I did see the scuff, and gave my mate the 'breath through clenched teeth' look lol

[Drizz]

heres all mine if youre interested:


https://www.facebook.com/media/set/?set ... d2fde69533