Next came the power steering
I had the idea of fitting the power steering box off of the
plymouth but had to think long & hard about how it would
work if at all.
I decided to fit it on its side & use the steering columb
as well.
This included columb change for the auto gearbox hazard
switch & indicator plus horn buttons also ignition switch
& steering lock.
http://s1248.photobucket.com/albums/hh4 ... air119.jpgI welded a large plate to the offside inner wing with a
hole for the shaft & reinforced the top of the chasis rail
including making a pyramid shape to carry the s/box.
I had to also weld a plate onto the bulkhead for the s/columb.