Transit MK3 bolts hexagon dimension at the neck manifold

[Mauritx]

As per picture, what are the dimension of these? I lost one..

[metalworker0]

You don't mention engine size , petrol, or diesel . year. FWD, RWD

and what's wrong with taking measurements off the other bolts. / STUDS / NUTS

note; because its old, the bolts or studs and nuts, may not be metric..

This is as close to it, as i can get you, on the parts diagrams with the info you provided

http://www.catcar.info/ford/?lang=en&l= ... QtMjAwMCJ9

all the best.mark

[metalworker0]

BTW - if you are talking about the bolts or studs and nuts that hold the down pipe to the manifold .

Then any good tyre and exhaust fitting centre will most likely have them in stock, take the manifold with you .

Ask them to send a tap up each thread to clean it .

note ... don't ask a 16 / 17 year old to do this . look for the most senior experienced guy .

all the best.mark

[Chug]

If you mean the air filter bolts then I don't know the dimensions as they are just listed as special screw 6171205

like this
https://www.ebay.co.uk/itm/285684986209