So here's a few pics of my mk6 6 the first transit I've ever owned, it must of had a hard 15 yrs with no care considered at all and then just px'd when it was on its last legs, although the engine seems spot and starts first time I've had a few initial electrical probs to sort along with the clutch master cylinder to change, the biggest problem tho is the amount of rot underneath now im no stranger to a angle grinder and welder so im hoping ive not bitten of more than I can weld here a pic of the van and what ive done so far
Now this bit was a shock
plans just keep it road worthy for now then who knows
As well as all the welding at the rear I also need to do the inner front sills, now ive seen this part for sale but don't think I need the section that goes up into what I presume is behind the wheel arch can I cut the up right section off and use whats left to repair the inner sill or is there another repair section available?
Got a few more bits done found a local supplier 5 mins from me a little bit dearer but no postage https://www.crashrepairparts.com/session/login probably done wrong part first but hay ho it'll look the same when done hardest part is finding fresh metal to weld to,
Ended up cutting the wheel arches of as I wasn't happy trying to fit the inner arch with the arch in place, I had to weld it back together as I had cut it to try and make it fit
And then onto the other side
And the left over bits
Last edited by edz27 on Thu Jul 30, 2015 7:20 pm, edited 1 time in total.
I cant beleave there is no paint or anything inside the sills etc. No wonder they rot. I really need to blather mine with wax old. Been gunna do it since it was new and its nearly 4 yrold now.
"due to ever increasing work load the light at the end of the tunnel has been turned off!"