As you all know, the outriggers at the front of the rear spring are different when the van is fitted with a side loading door, the part we will deal with first is identified in
GREEN below;
![Image](https://image.ibb.co/bREYx7/SWB_Mk6_Underside_View_06.jpg)
Here are some pictures of the part, this part suits the left hand side of the van when fitted with a side loading door on that side, available from stock for just £45 plus postage, produced from 1.5mm Zintec and fitted with the two internal stiffeners. A 'mirror' image part is available for vans fitted with a side loading door on the right hand side.
![Image](https://image.ibb.co/isy8aS/New_C_Post_Outrigger_01.jpg)
![Image](https://image.ibb.co/isy8aS/New_C_Post_Outrigger_01.jpg)
Here are some picture of this part being fitted to a customer's van in our workshop;
![Image](https://image.ibb.co/eqOkN7/New_C_Post_Outrigger_in_Place_01.jpg)
In this picture you can see we have bent the end of the main hanger mounting down to enable this part to be fitted, no need to cut a chunk of the floor out!
![Image](https://image.ibb.co/j1Lh27/C_Post_Outrigger_04.jpg)
Another view of the part clamped in place;
![Image](https://image.ibb.co/muH1vS/C_Post_Outrigger_02.jpg)
The lower 'C' post panel that fits into the end of the outrigger needed replacement, here you see the replacement part clamped in place;
![Image](https://image.ibb.co/cMwY9n/C_Post_Panel_01.jpg)
This part is available for just £25 and suits the left hand side when the van is fitted with a side loading door on that side, available from stock. The 'mirror' image for vans with a side loading door on the right hand side is available to order.
Here are some more picture of the parts in place on the van;
![Image](https://image.ibb.co/cyLX27/Lower_C_Post_Panel_In_Place.jpg)
![Image](https://image.ibb.co/c9zyaS/C_Post_Outrigger_03.jpg)
These two pictures show the 'join' that needs to be welded after installation, this allows the outrigger to be fitted 'over' the lower 'C' post;
![Image](https://image.ibb.co/fseEFS/C_Post_Outrigger_Welded_01.jpg)
![Image](https://image.ibb.co/iEjEFS/C_Post_Outrigger_in_Place_02.jpg)
With a pit of protective paint the repair can be made to look 'factory'
![Image](https://image.ibb.co/maSWUn/C_Post_Repair_01.jpg)
If you are interested in these or any other parts we produce, or advice and assistance on body repairs for your vehicle then please use the hyperlink below and drop us a line.