Ford Transit Forum

by **Anothertransit12** » Tue Jun 01, 2021 11:20 pm

20210601_193414.jpg

Hi folks. Anyone know what model transit these pistons would suit? I have a pallet full!

by **MinorMatt** » Wed Jun 02, 2021 8:15 am

Apparently the 2.5Di has a 93.67mm bore.

What do the pistons themselves look like? Is the combustion chamber central or offset (if they have one?)

by **Anothertransit12** » Wed Jun 02, 2021 2:19 pm

Hi. I think they are offset but i will have a look when back at the yard . Thanks

by **Anothertransit12** » Mon Jun 07, 2021 9:28 pm

Here is the pic.

by **bambi mk 1** » Mon Jun 07, 2021 9:47 pm

2.4 York mk 1/2 I'd say depending on size :wink:

by **MinorMatt** » Tue Jun 08, 2021 8:39 am

Not 2.5Di or 2.5Tdi

So I think Bambi is probably right so I would take an educated guess of a 2.4 york

by **dumper** » Tue Jun 08, 2021 9:18 am

Looking in the Haynes mk5 photo it’s not them they have a central combustion Chambers from memory yes York engine.

by **MinorMatt** » Tue Jun 08, 2021 9:35 am

dumper wrote:Looking in the Haynes mk5 photo it’s not them they have a central combustion Chambers from memory yes York engine.

2.5Di has central combustion chamber, 2.5TDi has an offset combustion chamber. But both are round, not the figure of 8 shape shown in the photo

by **Anothertransit12** » Wed Jun 09, 2021 11:10 pm

Thank you fellas. Won't be a huge demand for them so. ☺

by **dumper** » Thu Jun 10, 2021 12:15 am

Anothertransit12 wrote:Thank you fellas. Won't be a huge demand for them so. ☺

And alloy scrap is very low as well.

by **Anothertransit12** » Thu Jun 10, 2021 6:31 am

Not sure what the scrap price is but it would be seem a waste.

NOW BOOKED FOR 2026 Transitmania 17 @ Santa Pod 17th to 19th July 2026 ALL DETAILS HERE