Mk 3 Auto box,propshaft ,crossmeber etc..

[vana mana]

I got all these bits from a petrol engine auto to manual swop...the auto box probably needs a seal and filter clean as was playing up..

Looking at £50.00 lot collection only..

Any good to anyone ???

[MinorMatt]

Quite possibly! I don't suppose you (or anyone else) will know how much work is involved it mating it up with a V6?

[rover]

Which V6? Pinto Bell housing is the same as Cologne I believe

[MinorMatt]

Im not sure yet, but its likely to be an essex

(this is a non transit project by the way - its a minor pickup)

[rover]

Ah right, I'm not sure on the essex bolt pattern, but different bellhousings are still out there so I'm sure you could make it fit.

[AlanN]

This going to be a C3 box isnt it? when did they start using the A4LD?
Granada MK2 2.8i bellhousing will fit with no issues on the C3, if its a A4LD, you cant use the granny one and will have to find a Sierra V6 one, due to oil ways being different

[rover]

I dont know what year the van is but A4LD from 1989.

[AlanN]

My haynes only shows a C3, but Im sure some of them where A4LD too. I had one from a member on here who converted his to manual... Or am I talkin crap!

[MinorMatt]

If its an A4LD I am definately interested!

[rover]

My haynes only shows a C3, but Im sure some of them where A4LD too. I had one from a member on here who converted his to manual... Or am I talkin crap!

Not you talking crap its the manual

My engine and box, dash wiring loom/fusebox etc came from a 1989 LWB minibus When I first changed the filter I had to get the reg number from the guy I bought the engine n gearbox from cos Sandicliffe recond it was a C3.....D1ckheads