*NOW BOOKED FOR 2026* Transitmania 17 @ Santa Pod 17th to 19th July 2026 *ALL DETAILS HERE*
transit hub nut
Moderator: Luke
24 posts
• Page 1 of 2 • 1, 2
transit hub nut
by kia » Mon Aug 15, 2011 2:15 pm
hi could anybody tell me the size of transit hub nuts.thanks ps new transit owner.
- kia
- Newbie
- Posts: 9
- Joined: Sat Aug 13, 2011 7:13 pm
Re: transit hub nut
by Brains_transit » Mon Aug 15, 2011 2:45 pm
The wheel nuts or the big nut in the centre that holds the driveshaft.
- Brains_transit
- Transit Extremist
- Posts: 5346
- Joined: Fri Sep 26, 2008 6:42 pm
Re: transit hub nut
by kia » Mon Aug 15, 2011 3:07 pm
big nut in centre. not sure if its 32mm 34 36.have to buy 1
- kia
- Newbie
- Posts: 9
- Joined: Sat Aug 13, 2011 7:13 pm
Re: transit hub nut
by Brains_transit » Mon Aug 15, 2011 11:00 pm
36mm and It needs to be a 3/4 drive as a torque wrench that goes to 420nm also is 3/4. Also a deep socket or it hits the end of the driveshaft if it's shallow
- Brains_transit
- Transit Extremist
- Posts: 5346
- Joined: Fri Sep 26, 2008 6:42 pm
Re: transit hub nut
by MinorMatt » Wed Aug 17, 2011 10:30 am
Doesn't it vary depending whether is is FWD/RWD and whether it is front or rear hubs?
Lucas Laser 2000/IDS
95 Pre Production DRW TD Highcube
95 Hallmark
96 150 100PS LWB Hi-Top
96 Autosleeper Duetto
06 Mk7 (scrap)
09 140PS T330S 2.2
Gaffa tape is like the force, it has a light side, a dark side, and it holds the universe together
95 Pre Production DRW TD Highcube
95 Hallmark
96 150 100PS LWB Hi-Top
96 Autosleeper Duetto
06 Mk7 (scrap)
09 140PS T330S 2.2
Gaffa tape is like the force, it has a light side, a dark side, and it holds the universe together
-
MinorMatt - Transit Extremist
- Posts: 24611
- Joined: Mon Sep 17, 2007 7:53 pm
- Location: Herefordshire/Gloucestershire/Berkshire
Re: transit hub nut
by Brains_transit » Wed Aug 17, 2011 12:59 pm
It's 36mm if it's fwd front hub. I'm sure if it's a Rwd on the front hub then the dummy shaft doesn't need removed so no need to remove thd big nut to change the discs.
- Brains_transit
- Transit Extremist
- Posts: 5346
- Joined: Fri Sep 26, 2008 6:42 pm
Re: transit hub nut
by MinorMatt » Wed Aug 17, 2011 1:05 pm
no mention of discs though... Might be doing the rear wheel bearings?
(I know... I am beingy overly picky today....)
(I know... I am beingy overly picky today....)
Lucas Laser 2000/IDS
95 Pre Production DRW TD Highcube
95 Hallmark
96 150 100PS LWB Hi-Top
96 Autosleeper Duetto
06 Mk7 (scrap)
09 140PS T330S 2.2
Gaffa tape is like the force, it has a light side, a dark side, and it holds the universe together
95 Pre Production DRW TD Highcube
95 Hallmark
96 150 100PS LWB Hi-Top
96 Autosleeper Duetto
06 Mk7 (scrap)
09 140PS T330S 2.2
Gaffa tape is like the force, it has a light side, a dark side, and it holds the universe together
-
MinorMatt - Transit Extremist
- Posts: 24611
- Joined: Mon Sep 17, 2007 7:53 pm
- Location: Herefordshire/Gloucestershire/Berkshire
Re: transit hub nut
by Brains_transit » Wed Aug 17, 2011 1:19 pm
MinorMatt wrote:no mention of discs though... Might be doing the rear wheel bearings?
(I know... I am beingy overly picky today....)
True but when I first got my van I just measured them myself
- Brains_transit
- Transit Extremist
- Posts: 5346
- Joined: Fri Sep 26, 2008 6:42 pm
Re: transit hub nut
by El transito » Wed Aug 17, 2011 2:20 pm
If it's a 280 FWD with discs all round, All hub nuts are 36mm
If it has drums on the back there are no centre nuts.
If it's a 350 (or other) RWD, the dummy shaft nut is still 36mm.
If it has drums on the back there are no centre nuts.
If it's a 350 (or other) RWD, the dummy shaft nut is still 36mm.
- El transito
- Transit Aficionado
- Posts: 467
- Joined: Tue Feb 15, 2011 5:02 pm
- Location: Manilva Spain
Re: transit hub nut
by MinorMatt » Wed Aug 17, 2011 3:34 pm
There will be a hub nut on the back... What stops the hub falling out?
Lucas Laser 2000/IDS
95 Pre Production DRW TD Highcube
95 Hallmark
96 150 100PS LWB Hi-Top
96 Autosleeper Duetto
06 Mk7 (scrap)
09 140PS T330S 2.2
Gaffa tape is like the force, it has a light side, a dark side, and it holds the universe together
95 Pre Production DRW TD Highcube
95 Hallmark
96 150 100PS LWB Hi-Top
96 Autosleeper Duetto
06 Mk7 (scrap)
09 140PS T330S 2.2
Gaffa tape is like the force, it has a light side, a dark side, and it holds the universe together
-
MinorMatt - Transit Extremist
- Posts: 24611
- Joined: Mon Sep 17, 2007 7:53 pm
- Location: Herefordshire/Gloucestershire/Berkshire
Re: transit hub nut
by El transito » Wed Aug 17, 2011 5:18 pm
MinorMatt wrote:There will be a hub nut on the back... What stops the hub falling out?
If it's a 350 single wheel and has drum brakes the hub is secured by a ring of 14mm bolts which also retains the brake backplate, the bolts are accessed by removing the halfshaft.
- El transito
- Transit Aficionado
- Posts: 467
- Joined: Tue Feb 15, 2011 5:02 pm
- Location: Manilva Spain
Re: transit hub nut
by MrMPuk » Wed Aug 17, 2011 5:30 pm
El transito wrote:MinorMatt wrote:There will be a hub nut on the back... What stops the hub falling out?
If it's a 350 single wheel and has drum brakes the hub is secured by a ring of 14mm bolts which also retains the brake backplate, the bolts are accessed by removing the halfshaft.
What's the 65mm nut behind the half shaft then?
- MrMPuk
- Transit Extremist
- Posts: 27856
- Joined: Sat Mar 26, 2005 7:50 am
24 posts
• Page 1 of 2 • 1, 2
Return to Technical Problems & Questions
Who is online
Users browsing this forum: No registered users