Does anyone know where this retaining clip goes?

[paule3d]

I fitted a recon engine and had to swap all the ancillaries etc. Took me a few days, I put this to one side for safe keeping as it might be important, then after engine was reassembled I found it and totally forgot what it holds in to place!!

Thanks

[metalworker0]

The retaining clip shown is known as an "R" clip... generally never used inside an engine , used on small nuts that are on the end of shafts, or just through a hole on the end of a shaft - example old style turbo actuator.

btw .. my search only found such a clip on the brake booster / pedal attachment

all the best.mark

[metalworker0]

Part number 4662772 ???


number 4

https://cdn.fitinpart.sg/fp/image/cache ... b1910.webp


all the best.mark

[paule3d]

OK thanks a lot Mark, I must have got mixed up and imagined remembering it coming off something in the engine bay!

[metalworker0]

Vans built between 28th September 2012 and 6th February 2013, there was a recall, the clips, they can fall out resulting in the brake pedal falling off!

also custom models built - 8th October 2012 and 6th February 2013

built at Kocaeli, Turkey

all he best.mark

[tranmx2]

As metalworker has shown.
Here is catcar location using 2012 E5 2.2 RWD van, TT9 European.

R clip booster pedal con.JPG

[tranmx2]

Part number 4662772 ???


number 4

https://cdn.fitinpart.sg/fp/image/cache ... b1910.webp


all the best.mark

Image shows 2000 to 2009! Could still be the same.