hazard, hazard

[petrolhead65]

can anyone give me a clue.i have a 96 lwb hi cube but the horn and hazards don't work i checked the fuse it,s ok ,and there is power at the fuse cos when you put the fuse in the alarm squeeks .the indicators work ok till you press the hazard switch then nothing what is it .PLEASE HELLLLP.i start work monday i need them

[negg]

id check the flasher relay just to see if its working ok

[petrolhead65]

id check the flasher relay just to see if its working ok

Thank you i'll check that

[Timbo]

Fuse F14 does hazards and horn..............fifth one from right in bottom row (20 amp).

[Luke]

if its not the relay might be the switch

[petrolhead65]

Fuse F14 does hazards and horn..............fifth one from right in bottom row (20 amp).

checked the fuses first thing but relay is ok too

[MrMPuk]

Fuse F14 does hazards and horn..............fifth one from right in bottom row (20 amp).

checked the fuses first thing but relay is ok too

The fact that you've lost both at the same time I'd still say fuse. It may look alright but I'd replace it to be sure.

[GBBiker]

If indicators work but hazards don't, that would suggest to me that the hazard light switch is at fault. It's a common failure on the MK5

[petrolhead65]

Hi everybody, i found the problem with the hazards .it was the wiring, some clot has cut and joined the wiring at sometime and the joints are the prob.so just got to rewire that and iam on the road